Although the processing of natural gas is in many respects less complicated than the processing and refining of crude oil, it is equally as necessary before its use by end users.
Used to clean the borehole, stabilize rock, control pressures, or enhance drilling rates, drilling fluids and their circulation systems are used in all phases of a drilling operation.
This essential handbook and ready reference offers a detailed overview of the existing and currently researched technologies available for the control of mercury in coal-derived gas streams and that are viable for meeting the strict standards set by environmental protection agencies.
This essential handbook and ready reference offers a detailed overview of the existing and currently researched technologies available for the control of mercury in coal-derived gas streams and that are viable for meeting the strict standards set by environmental protection agencies.
Written as a practical introduction to biogas plant design and operation, this book fills a huge gap by presenting a systematic guide to this emerging technology -- information otherwise only available in poorly intelligible reports by US governmental and other official agencies.
Almost every modern manufacturing process relies on industrial gases, and sales of such gases are expected to rise by around 45% over the next five years.
The ongoing discussion about reaching the "e;peak-oil point"e; (maximal delivery rate with conventional methods) emphasizes a fundamental change of the frame conditions of oil-based basic products.
The ongoing discussion about reaching the "e;peak-oil point"e; (maximal delivery rate with conventional methods) emphasizes a fundamental change of the frame conditions of oil-based basic products.
Although the processing of natural gas is in many respects less complicated than the processing and refining of crude oil, it is equally as necessary before its use by end users.
Working Guide to Petroleum and Natural Gas Production Engineering provides an introduction to key concepts and processes in oil and gas production engineering.
Gas hydrates, or clathrate hydrates, are crystalline solids resembling ice, in which small (guest) molecules, typically gases, are trapped inside cavities formed by hydrogen-bonded water (host) molecules.
Gas hydrates, or clathrate hydrates, are crystalline solids resembling ice, in which small (guest) molecules, typically gases, are trapped inside cavities formed by hydrogen-bonded water (host) molecules.
A comprehensive review of the current status and challenges for natural gas and shale gas production, treatment and monetization technologies Natural Gas Processing from Midstream to Downstream presents an international perspective on the production and monetization of shale gas and natural gas.
A comprehensive review of the current status and challenges for natural gas and shale gas production, treatment and monetization technologies Natural Gas Processing from Midstream to Downstream presents an international perspective on the production and monetization of shale gas and natural gas.
Oil and Gas Exploration: Methods and Application presents a summary of new results related to oil and gas prospecting that are useful for theoreticians and practical professionals.
Oil and Gas Exploration: Methods and Application presents a summary of new results related to oil and gas prospecting that are useful for theoreticians and practical professionals.
Provides an overview of the different pathways to produce Synthetic Natural Gas Covers technological, and economic aspects of this Synthetic Natural Gas Details the most popular technologies and state-of-the-art of SNG technologies while also covering recent and future research trends Covers the main process steps during conversion of coal and dry biomass to SNG: gasification, gas cleaning, methanation and gas upgrading Describes a number of novel processes for the production of SNG with their specific combination of process steps as well as the boundary conditions Covers important technical aspects of Power-to-Gas processes
Provides an overview of the different pathways to produce Synthetic Natural Gas Covers technological, and economic aspects of this Synthetic Natural Gas Details the most popular technologies and state-of-the-art of SNG technologies while also covering recent and future research trends Covers the main process steps during conversion of coal and dry biomass to SNG: gasification, gas cleaning, methanation and gas upgrading Describes a number of novel processes for the production of SNG with their specific combination of process steps as well as the boundary conditions Covers important technical aspects of Power-to-Gas processes
Provides comprehensive information about the key exploration, development and optimization concepts required for gas shale reservoirs Includes statistics about gas shale resources and countries that have shale gas potential Addresses the challenges that oil and gas industries may confront for gas shale reservoir exploration and development Introduces petrophysical analysis, rock physics, geomechanics and passive seismic methods for gas shale plays Details shale gas environmental issues and challenges, economic consideration for gas shale reservoirs Includes case studies of major producing gas shale formations
Provides comprehensive information about the key exploration, development and optimization concepts required for gas shale reservoirs Includes statistics about gas shale resources and countries that have shale gas potential Addresses the challenges that oil and gas industries may confront for gas shale reservoir exploration and development Introduces petrophysical analysis, rock physics, geomechanics and passive seismic methods for gas shale plays Details shale gas environmental issues and challenges, economic consideration for gas shale reservoirs Includes case studies of major producing gas shale formations
This is the fourth volume in a series of books focusing on natural gas engineering, focusing on two of the most important issues facing the industry today: disposal and enhanced recovery of natural gas.
This is the fourth volume in a series of books focusing on natural gas engineering, focusing on two of the most important issues facing the industry today: disposal and enhanced recovery of natural gas.
Gas Treating: Absorption Theory and Practice provides an introduction to the treatment of natural gas, synthesis gas and flue gas, addressing why it is necessary and the challenges involved.
Gas Treating: Absorption Theory and Practice provides an introduction to the treatment of natural gas, synthesis gas and flue gas, addressing why it is necessary and the challenges involved.
This three-volume series, Advances in Natural Gas Engineering, focuses on the engineering of natural gas and its advancement as an increasingly important energy resource.
This three-volume series, Advances in Natural Gas Engineering, focuses on the engineering of natural gas and its advancement as an increasingly important energy resource.
The expert, all-inclusive guide on LNG risk based safety Liquefied Natural Gas (LNG) is the condensed form of natural gas achieved by cryogenic chilling.
Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance.
Used to clean the borehole, stabilize rock, control pressures, or enhance drilling rates, drilling fluids and their circulation systems are used in all phases of a drilling operation.
The Hydrogen Energy Transition addresses the key issues and actions that need to be taken to achieve a changeover to hydrogen power as it relates to vehicles and transportation, and explores whether such a transition is likely, or even possible.
