A Handbook of Lattice Spacing and Structures of Metals and Alloys is a 12-chapter handbook that describes the structures and lattice spacings of all binary and ternary alloys.
Atomic Structure and the Strength of Metals is a collection of prepared lectures presented at the 1956 Page-Barbour Lectures before the University of Virginia.
Treatise on Materials Science and Technology, Volume 14: Metallurgy of Superconducting Materials covers the practical use of metallurgy of superconducting materials.
Specialty Steels and Hard Materials covers the proceedings of the International Conference on Recent Developments in Specialty Steels and Hard Materials (Materials Development '82).
Electron and Positron Spectroscopies in Materials Science and Engineering presents the advances and limitations of instrumentations for surface and interface probing useful to metallurgical applications.
Perspectives in Hydrogen in Metals: Collected Papers on the Effect of Hydrogen on the Properties of Metals and Alloys discusses the advancement in the understanding of the effects of hydrogen on the physical and mechanical properties of metals and alloys.
Modern Metallography focuses on the defects in the properties of metals, such as precipitates, cracks, grain boundaries, dislocations, stacking faults, and impurity atoms.
Corrosion Testing for Metal Finishing provides metal finishers with a range of test methods as well as guidance in the choice of method for a particular finish.
The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968.
Pergamon Series of Monographs in Laboratory Techniques, Volume 3: An Introduction to Metallurgical Laboratory Techniques covers improved methods and techniques in metallurgy relating to the practical aspects of laboratory work, by experimentation, practice and experience.
Coordination Chemistry is a collection of invited lectures presented at the 20th International Conference on Coordination Chemistry held in Calcutta, India, on December 10-14, 1979, and organized by the International Union of Pure and Applied Chemistry in cooperation with India's National Science Academy and the Department of Science & Technology.
Engineering Equipment for Foundries covers the proceedings of the Seminar on Engineering Equipment for Foundries and Advanced Methods of Producing such Equipment, held in Palais des Nations in Geneva, Switzerland on November 28-December 2, 1977.
Diffusion Beading of Materials is an attempt to pool the experience in vacuum diffusion bonding accumulated by a number of mechanical engineering works, research establishments, and colleges.
Precipitation Hardening deals with precipitation hardening, an important method by which the resistance to plastic deformation of a metal crystal may be increased.
The Iron Blast Furnace: Theory and Practice presents the significant role of iron blast furnace by which iron is efficiently and rapidly reduced from ore and it is the basis for all primary steelmaking.
Chemical Metallurgy provides an understanding of the fundamental chemical principles and demonstrates the application of these principles to process metallurgy and corrosion protection.
Aluminum Alloys: Structure and Properties is a reference book that provides a concise description of the practical aspects of structures and properties of aluminum alloys.
Eutectic Solidification Processing: Crystalline and Glassy Alloys deals with solidification theory and its application to eutectic processing of crystalline and glassy alloys.
Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use.
An Introduction to Chemical Metallurgy, Second Edition introduces the reader to chemical metallurgy, including its fundamental principles and some of their applications.
Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys.
The Structures of Alloys of Iron: An Elementary Introduction provides an elementary review of some of the factors affecting the structures of alloys of iron, with examples illustrating points of interest.
Modern Physical Metallurgy, Third Edition discusses the fundamental principles of physical metallurgy and demonstrates how the application of the principles leads to a clearer understanding of many technologically important metallurgical phenomena.
Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field.
Control and Analysis in Iron and Steelmaking discusses the associated instrumentations and processes involved in iron and steel manufacture, with an emphasis on the process technologies of its various stages.
Chemical Metallurgy, Second Edition provides the fundamental chemical principles and demonstrates the application of these principles to process metallurgy, materials synthesis and processing, and corrosion protection.
Passivity of Metals and Semiconductors covers the proceedings of the Fifth International Symposium on Passivity, held in Bombannes, France on May30 - June3, 1983.
Using a mold for centrifugal casting as an example, discusses the types of apparatus and tools that are commonly affected by thermal fatigue during industrial processes, and examines the various factors that lead to such failure.
