Computer-aided design (CAD)

This professionaltreatise on engineering graphics emphasizes engineering geometry as thetheoretical foundation for communication of design ideas with real worldstructures and products.

This book presents the proceedings of the 8th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '16), incorporating the 11th Cambridge Workshop on Rehabilitation Robotics, held in Cambridge, England in March 2016.

This book provides a detailed review of power amplifiers, including classes and topologies rarely covered in books, and supplies sufficient information to allow the reader to design an entire amplifier system, and not just the power amplification stage.

This thesis describes the physics and computational aspects of an end-to-end simulator to predict the performance of a Space-based Far Infrared Interferometer.

Thisintroductory book discusses how to plan and build useful, reliable,maintainable and cost efficient computer systems for automated engineeringdesign.

This volume constitutes the papers presented at the 15thInternational Conference on Computer Aided Systems Theory, EUROCAST 2015, heldin February 2015 in Las Palmas de Gran Canaria, Spain.

This book provides a technical overview of low-costparabolic trough collector (PTCs) prototypes for low-temperature heat demand.

This book contains extended and revised versions of the best papers presented at the 22nd IFIP WG 10.

This book reflects and expands on the current trend in the building industry to understand, simulate and ultimately design buildings by taking into consideration the interlinked elements and forces that act on them.

This book constitutes the refereed proceedings of the 12th International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2015, held in Mallorca, Spain, in September 2015.

This book contains extended and revised versions of the best papers presented at the 21st IFIP WG 10.

This book constitutes the refereed proceedings of the First Conference on Creativity in Intelligent Technologies and Data Science, CIT&DS 2015, held in Volgograd, Russia, in September 2015.

Providing a step-by-step guide for the implementation of virtual manufacturing using Creo Parametric software (formerly known as Pro-Engineer), this book creates an engaging and interactive learning experience for manufacturing engineering students.

Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools.

This volume constitutes the thoroughly refereed post-conference proceedings of the 8th International Conference on Curves and Surfaces, held in Paris, France, in June 2014.

The two volumes IFIP AICT 459 and 460 constitute the refereed proceedings of the International IFIP WG 5.

The two volumes IFIP AICT 459 and 460 constitute the refereed proceedings of the International IFIP WG 5.

Describing a newoptimization algorithm, the Teaching-Learning-Based Optimization (TLBO), in aclear and lucid style, this book maximizes reader insights into how the TLBOalgorithm can be used to solve continuous and discrete optimization problemsinvolving single or multiple objectives.

The lessons in this fundamental text equip students with the theory of Computer Assisted Design (CAD), Computer Assisted Engineering (CAE), the essentials of Rapid Prototyping, as well as practical skills needed to apply this understanding in real world design and manufacturing settings.

This monograph presents the latest developments and applications of computational tools related to the biosciences and medical engineering.

Thousands of workers labored at Kennedy Space Center around the clock, seven days a week, for half a year to prepare a mission for the liftoff of Apollo 11.

This book is at once a supplement to traditional foundation engineering textbooks and an independent problem-solving learning tool.

The book reports on a novel approach for holistically identifying the relevant state drivers of complex, multi-stage manufacturing systems.

This work addresses the research and development of an innovative optimization kernel applied to analog integrated circuit (IC) design.

This book constitutes the thoroughly refereed post-conference proceedings of the 8th International Conference on Numerical Methods and Applications, NMA 2014, held in Borovets, Bulgaria, in August 2014.

This book details the state-of-the-art of research and development in design computing and design cognition.

This book contains 24 technical papers presented at the fourth edition of the Advances in Architectural Geometry conference, AAG 2014, held in London, England, September 2014.

The book contains the data required to measure and manage energy consumption in residential buildings.

This book constitutes the refereed proceedings of the 11th International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2014, held in Seattle, WA, USA, in September 2014.

Presenting the concept and design and implementation of configurable intelligent optimization algorithms in manufacturing systems, this book provides a new configuration method to optimize manufacturing processes.

This book summarizes research carried out in workshops of the SAGA project, an Initial Training Network exploring the interplay of Shapes, Algebra, Geometry and Algorithms.

The book introduces the reader to game-changing ways of building and utilizing Internet-based services related to design and manufacture activities through the cloud.

This book describes the computational challenges posed by the progression toward nanoscale electronic devices and increasingly short design cycles in the microelectronics industry, and proposes methods of model reduction which facilitate circuit and device simulation for specific tasks in the design cycle.

This concise reference helps readers avoid the most commonplace errors in generating or interpreting engineering drawings.

This volume collects selected contributions from the "e;Fourth Tetrahedron Workshop on Grid Generation for Numerical Computations"e;, which was held in Verbania, Italy in July 2013.

This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products.

Focusing on the computer graphics required to create digital media this book discusses the concepts and provides hundreds of solved examples and unsolved problems for practice.

This book presents the state of the art in advanced customization within the sector of architectural design and construction, explaining important new technologies that are boosting design, product and process innovation and identifying the challenges to be confronted as we move toward a mass customization construction industry.

Through a series of step-by-step tutorials and numerous hands-on exercises, this book aims to equip the reader with both a good understanding of the importance of space in the abstract world of engineers and the ability to create a model of a product in virtual space - a skill essential for any designer or engineer who needs to present ideas concerning a particular product within a professional environment.

Many problems in scientific computing are intractable with classical numerical techniques.

The word "e;render"e; isn't unique to the vocabulary of computer graphics.

Michael Leyton has developed new foundations for geometry in which shape is equivalent to memory storage.

This book presents range of topics concerning integrated CAD (including Optimization) for use in Architecture (including Planning), Civil Engineering and Construction (AEC), and thus, helps introduce a full-length treatment of the subject, enabling practitioners to adopt an Integrated Computer-Aided Design Approach in their professional activity.

The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.

This textbook presents the core of recent advances in design theory and its implications for design methods and design organization.

The book introduces the fundamentals and development of Computer aided design, Computer aided process planning, and Computer aided manufacturing.

This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance.

The focus of this book is an application of Digital Twin as a concept and an approach, based on the most accurate view on a physical production system and its digital representation of complex engineering products and systems.

The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.