Automatic control engineering

This book is the first to present the application of the hybrid system theory to systems with EPCA (equations with piecewise continuous arguments).

This thesis introduces novel and significant results regarding the analysis and synthesis of positive systems, especially under l1 and L1 performance.

These proceedings present the latest information on regulations and standards for medical and non-medical devices, including wearable robots for gait training and support, design of exoskeletons for the elderly, innovations in assistive robotics, and analysis of human-machine interactions taking into account ergonomic considerations.

This book presents the most important findings from the 9th International Conference on Modelling, Identification and Control (ICMIC'17), held in Kunming, China on July 10-12, 2017.

This book offers fundamental information on the analysis and synthesis of continuous and sampled data control systems.

This book introduces advanced thyristor-based shunt hybrid active power filters (HAPFs) for power quality improvement in power grids, which are characterized by a low dc-link operating voltage and a wide compensation range.

The volume contains 75 papers presented at International Conference on Communication and Networks (COMNET 2015) held during February 19-20, 2016 at Ahmedabad Management Association (AMA), Ahmedabad, India and organized by Computer Society of India (CSI), Ahmedabad Chapter, Division IV and Association of Computing Machinery (ACM), Ahmedabad Chapter.

This book presents selected research papers from CISC'17, held in MudanJiang, China.

In the context of coupled-coordination control mechanisms, this book focuses on the delay robustness of consensus problems with asynchronously coupled and synchronously coupled consensus algorithms respectively.

The proceedings collect the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation.

This book systematically describes the concepts and principles for multi-satellite relative motion, passive and near passive formation designs, trajectory planning and control for fuel optimal formation maneuvers, and formation flying maintenance control design.

The book provides insights of International Conference in Communication, Devices and Networking (ICCDN 2017) organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India during 3 - 4 June, 2017.

The book is the first book on complex matrix equations including the conjugate of unknown matrices.

Second International Conference on Intelligent Computing and Applications was the annual research conference aimed to bring together researchers around the world to exchange research results and address open issues in all aspects of Intelligent Computing and Applications.

This book focuses on the study of possible adaptive sampling mechanisms for haptic data compression aimed at applications like tele-operations and tele-surgery.

This book offers an overview of power electronic applications in the study of power integrated circuit (IC) design, collecting novel research ideas and insights into fast transient response to prevent the output voltage from dropping significantly at the undershoot.

This book addresses cutting-edge topics in robotics and related technologies for rehabilitation, covering basic concepts and providing the reader with the information they need to solve various practical problems.

This book is a collection of selected papers presented at the First Congress on Intelligent Systems (CIS 2020), held in New Delhi, India, during September 5-6, 2020.

This book is concerned with the fault estimation problem for network systems.

This book gathers selected papers presented at the Third International Conference on Mechatronics and Intelligent Robotics (ICMIR 2019), held in Kunming, China, on May 25-26, 2019.

This book is inspired by the development of distributed model predictive control of networked systems to save computation and communication sources.

This book presents high-quality papers from the Seventh Asia International Symposium on Mechatronics (AISM 2019).

This book showcases new theoretical findings and techniques in the field of intelligent systems and control.

This book focuses on fault diagnosis for linear discrete time-varying (LDTV) systems and its applications in modern engineering processes, with more weighting placed on the development of theory and methodologies.

This book presents the proceedings of the International Conference on Aerospace System Science and Engineering (ICASSE 2019), held in Toronto, Canada, on July 30-August 1, 2019, and jointly organized by the University of Toronto Institute for Aerospace Studies (UTIAS) and the Shanghai Jiao Tong University School of Aeronautics and Astronautics.

This book presents a systematic study on the air balancing technologies in heating, ventilation and air conditioning (HVAC) systems.

This book gathers high-quality papers presented at the International Symposium on Optomechatronic Technology (ISOT 2018), which was organized by the International Society for Optomechatronics (ISOM) and Centro de Investigaciones en Optica (CIO) in Cancun, Mexico on November 5-8, 2018.

This book presents the proceedings of the 6th International Conference on Electrical, Control and Computer Engineering (InECCE 2021), held in Kuantan, Pahang, Malaysia, on 23 August 2021.

This book presents selected peer-reviewed papers from the International Conference on Mechanical and Energy Technologies, which was held on 7-8 November 2019 at Galgotias College of Engineering and Technology, Greater Noida, India.

The proceedings collect selected papers from the 11th International Workshop of Advanced Manufacturing and Automation (IWAMA 2021), held in Zhengzhou Polytechnic, China on 11 - 12 October, 2021.

This book comprises select peer-reviewed papers presented at the International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT) 2018.

This book includes high impact papers presented at the International Conference on Communication, Computing and Electronics Systems 2019, held at the PPG Institute of Technology, Coimbatore, India, on 15-16 November, 2019.

This book is a collection of selected papers presented at the First Congress on Intelligent Systems (CIS 2020), held in New Delhi, India during September 5 - 6, 2020.

This book highlights designs, implementations and applications of tracking differentiator (TD) algorithms.

This book discusses the principles, approaches, concepts and development programs for integrated aircraft avionics.

This book highlights operation principles for Air Traffic Control Automated Systems (ATCAS), new scientific directions in design and application of dispatching training simulators and parameters of ATCAS radio equipment items for aircraft positioning.

This book presents the select proceedings of Control Instrumentation and System Conference, (CISCON 2020) held at Manipal Institute of Technology, MAHE, Manipal.

This book showcases new theoretical findings and techniques in the field of intelligent systems and control.

This book features selected papers presented at the First International Conference on Agriculture Digitalization and Organic Production (ADOP 2021), held in St.

This book presents a compilation of selected papers from the 17th IEEE International Conference on Machine Learning and Applications (IEEE ICMLA 2018), focusing on use of deep learning technology in application like game playing, medical applications, video analytics, regression/classification, object detection/recognition and robotic control in industrial environments.

This book presents selected papers from the 9th International Workshop of Advanced Manufacturing and Automation (IWAMA 2019), held in Plymouth, UK, on November 21-22, 2019.

This textbook helps graduate level student to understand easily the linearization of nonlinear control system.

This book presents recent advances in robot control theory on task space sensory feedback control of robot manipulators.

This book provides a solution to "e;rare event"e; problems without using the classical theory of reliability and theory of probability.

This book presents best selected papers presented at the 4th International Conference on Smart Computing and Informatics (SCI 2020), held at the Department of Computer Science and Engineering, Vasavi College of Engineering (Autonomous), Hyderabad, Telangana, India.

This book presents select proceedings of the Electric Power and Renewable Energy Conference 2020 (EPREC 2020).

The subject of this book is theory, principles and methods used in radar algorithm development with a special focus on automotive radar signal processing.

This book addresses two fundamental issues of motor control for both humans and robots: kinematic redundancy and the posture/movement problem.

Gathering the proceedings of the conference MeTrApp 2019, this book covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery.

This book constitutes the proceedings of the third international conference AsiaHaptics 2018, held in Songdo, Korea.