Mechanical engineering

Supercritical pressure fluids have been exploited in many engineering fields, where binary mixtures are frequently encountered.

This state-of-the-art book highlights recent advances and discussions in tribological technologies in sheet metal forming.

This book is a collection of papers presented at XIV International Scientific Conference "e;INTERAGROMASH 2021"e;, held at Don State Technical University, Rostov-on-Don, Russia, during 24-26 February 2021.

The book presents select proceedings of the International Conference on Micro and Nanoelectronics Devices, Circuits and Systems (MNDCS-2021).

This book discusses the dynamic analysis of rigid-flexible robots and multibody systems with serial as well as closed-loop architecture.

This book provides state-of-the-art advances in several areas of importance in energy, combustion, power, propulsion, environment using fossil fuels and alternative fuels, and biofuels production and utilization.

This book is a collection of high-quality research articles.

Machine learning has become one of the most prevalent topics in recent years.

This thesis shares new findings on the interfacial mechanics of graphene-based materials interacting with rigid/soft substrate and with one another.

This brief covers case studies on Microbial Induced Corrosion (MIC) and its mitigation.

This book comprises state-of-the-art advances in energy, combustion, power, propulsion, environment, focusing on the production and utilization of fossil fuels, alternative fuels and biofuels.

This book features selected papers presented at the 15th International Conference on Electromechanics and Robotics "e;Zavalishin's Readings"e; - ER(ZR) 2020, held in Ufa, Russia, on 15-18 April 2020.

This book discusses various challenges and solutions in the fields of operation, control, design, monitoring and protection of microgrids, and facilitates the integration of renewable energy and distribution systems through localization of generation, storage and consumption.

This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc.

Gathering the proceedings of the conference MeTrApp 2019, this book covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery.

This book presents a selection of contributions from the 4th International Conference on Structural Nonlinear Dynamics and Diagnostics, reflecting diverse aspects of nonlinear and complex dynamics.

This book features selected papers presented at the 14th International Conference on Electromechanics and Robotics 'Zavalishin's Readings' - ER(ZR) 2019, held in Kursk, Russia, on April 17-20, 2019.

This book gathers selected papers presented at the Third International Conference on Mechatronics and Intelligent Robotics (ICMIR 2019), held in Kunming, China, on May 25-26, 2019.

This book presents and discusses recent developments in the broad field of spectroscopy, providing the reader with an updated overview.

This book presents a comprehensive, state-of-the-art review of the latest progresses in UHMWPE biomaterials, which has been critical for the performance and longevity of joint implants.

This book provides a comprehensive overview of the application of liquid biofuels to internal combustion (IC) engines.

This book introduces and develops the mathematical models used to describe crane dynamics, and explores established and emerging control methods employed for industrial cranes.

This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes.

This book discusses the maintenance aspect of rotating machines, which it addresses through a collection of contributions.

Nominated by Tsinghua University as an outstanding Ph.

Machine learning has become one of the most prevalent topics in recent years.

This thesis investigates the tribological viability of bio-based base stock to which different nanoparticles were incorporated for engine piston-ring-cylinder-liner interaction.

This thesis provides essential information on the systematic design of assembled lanthanide complexes for functional luminescent materials.

This book focuses on the analytical modeling of fractional-slot concentrated-wound (FSCW) interior permanent magnet (IPM) machines and establishes a basis for their magnetic and electrical analysis.

This brief is concerned with the fundamentals of corrosion of metallic materials and electrochemistry for better understanding of corrosion phenomena.

This book provides an introduction to Newtonian and relativistic mechanics.

This thesis addresses selected unsolved problems in the chemical mechanical polishing process (CMP) for integrated circuits using ruthenium (Ru) as a novel barrier layer material.

The book addresses computational methods for solving the problem of vibration, response, loads and stability of a helicopter rotor blade modeled as a rotating beam with flap or out-of-plane bending.

This book, compiles, presents, and explains the most important meta-heuristic and evolutionary optimization algorithms whose successful performance has been proven in different fields of engineering, and it includes application of these algorithms to important engineering optimization problems.

This book comprises the select proceedings of the ETAEERE 2016 conference.

This thesis focuses on producing hybrid freeform surfaces using an advanced diamond-turning process, understanding the generation of surface accuracies (form errors) and how the choice of cutting strategies affects these, as well as simplifying the complications of generating cutting paths for such freeform surfaces.

This book is intended to serve as a compendium on the state-of-the-art research in the field of biofuels.

This monograph is a first-of-its-kind compilation on high deposition pulse current GMAW process.

This book investigates the factors that lead to slip and fall incidents and establishes a relationship between the coefficient of friction (COF), floor slipperiness and floor roughness.

These proceedings present the latest information on regulations and standards for medical and non-medical devices, including wearable robots for gait training and support, design of exoskeletons for the elderly, innovations in assistive robotics, and analysis of human-machine interactions taking into account ergonomic considerations.

This thesis introduces novel and significant results regarding the analysis and synthesis of positive systems, especially under l1 and L1 performance.

This book addresses the solution of rotating beam free-vibration problems using the finite element method.

This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing.

This book discusses complex loadings of turbine blades and protective layer Thermal Barrier Coating (TBC), under real working airplane jet conditions.

This textbook introduces the student to a consistent approach of formulating and solving problems involving the biomechanics of solids and fluids.

This textbook introduces the student to a consistent approach of formulating and solving problems involving the biomechanics of solids and fluids.

The book is interwoven according to the intrinsic logics of modern most important applications of electrospun nanofibers.